Danielle SOM T4 Training
Section Link
Content Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.
Anchor Link
Developer: My preferred developer is a 20% solution of sodium citrate. Add 200 g. of sodium citrate to 750 ml. of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Clearing Agent: The recommended clearing agent for my method of Kallitype is a 3% solution of citric acid. To prepare, add 30 g. of citric acid to 750ml of distilled water*. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total developer.
Fixer: Add 50 g. of sodium thiosulfate to 750ml of distilled water. Stir until completely dissolved, and then add additional distilled water to make a 1000ml of total fixer*. You may also prepare the fixer as a concentrated solution at 4 times the strength above and dilute in distilled water at a 1 to 3 ratio for a working solution.
Hypo Clear: The hypo clear is a simple 1% sodium sulfite solution. To prepare, add 10 g. of sodium sulfite to 1000 ml. of distilled water and stir until completely dissolved*. This solution should be mixed just before use and discarded after about an hour of use.